跳至主要内容

How to deal with the surface problems of disc harrow?

How to deal with the surface problems of disc harrow?

Disc Harrow has absorbed the advantages of foreign advanced products of the same kind. According to standard design, the whole machine adopts combined structure, with Integral Rigid Harrow frame as the main body It is equipped with sealed rolling bearing with outer spherical surface and inner square hole for hydraulic lifting and transporting rubber wheel, spring leveling mechanism and disc Harrow Disc Harrow has the advantages of reasonable structure, strong and durable, convenient transportation, small turning radius, easy adjustment, maintenance and so on. Disc Harrow Plate is the main core components of disc Harrow, a disc harrow an important factor in the level of consolidation, the following we have a specific look at it:
1. Uneven hardness. During the deposition, the uneven thickness of the Disk Harrow by ten layers may cause the uneven hardness. The areas where the coating is hardened are usually caused by decarburization, where the operator penetrates the oxyacetylene flame center into the melted coating or where the inner flame center is 13:1 longer. The area of lower hardness of the deposited layer is usually the result of ten base metals mixed into the deposited layer.
2. Crack. The preheating temperature before the deposition is low, the process of the deposition is poorly controlled (the temperature drops too quickly) and the deposit is cooled rapidly after the deposition. Are Prone to crack in the deposited layer. Therefore, preheating and post-cooling before cladding is an important feature of ni-base cemented carbide oxyacetylene flame cladding. In addition, the Disk Harrow Operation Diagram, in the non-annealed parts of the quenching deposited also prone to cracks. If the cracks in the deposited layer have been extended to the base metal, they need to be completely removed with a grinding wheel (or by other mechanical processes) . Then according to the provisions of the process preheating, melting, slow cooling. If the crack does not extend to the base metal, the part can be reheated and melted to eliminate the crack.


评论

发表评论

此博客中的热门博文

The Difference Between Disc Harrow and Disc Plough

Disc Harrow has absorbed the advantages of foreign advanced products of the same kind. According to standard design, the whole machine adopts combined structure, with Integral Rigid Harrow frame as the main body It is equipped with sealed rolling bearing with outer spherical surface and inner square hole for hydraulic lifting and transporting rubber wheel, spring leveling mechanism and disc Harrow Disc Harrow has the advantages of reasonable structure, strong and durable, convenient transportation, small turning radius, easy adjustment, maintenance and so on. Disc Harrow Plate is the main core components of disc Harrow, a disc harrow an important factor in the level of consolidation, the following we have a specific look at it: 1. Uneven hardness. During the deposition, the uneven thickness of the disk harrow by ten layers may cause the uneven hardness. The areas where the coating is hardened are usually caused by decarburization, where the operator penetrates the oxyacetylene flame...
发表评论
阅读全文

PLANTING AND MANAGEMENT TECHNIQUES OF MAIZE IN EARLY SPRING

The key point of early spring maize management is to ensure timely sowing, increase the rate of emergence and ensure that the seedlings are strong. Spring plowing, this year spring precipitation in our province in general, moisture preservation, especially sowing layer (0 ~ 10 cm) moisture is the first should be considered in spring plowing. Spring fixed soil directly sowing or as little as possible soil, to level the appropriate sowing appropriate appropriate. If deep tillage is not practiced in the fall, deep loosening is used in the spring when the Soil Thaws One machine for deep fertilization (depth of about 30 cm) , and then the shallow rotation suppression sowing. Seed Selection Choose the "safe" variety. The so-called "safe" species are those that have been grown locally for at least two years and have performed well. As for the "fresh" species which have not been planted locally, we should try them out and expand the a...
发表评论
阅读全文

Corn Harvester work way, manufacturers to introduce

Corn Harvester work way, manufacturers to introduce The Corn Harvester mainly consists of cutting bar device, conveying device, hydraulic lifter and other mechanical devices. During the operation, the machine advances along the direction of the Corn Ridge, and the harvesting operation started during the driving process is carried out to carry out the mechanical operation of harvesting the corn. The cutter cuts off the corn Straw, and the Straw is exported in the right direction through the upper, middle and lower transportation chains And naturally placed to complete the harvesting work, so often can carry out large-scale harvesting operations and so on, to improve the efficiency of the Working People’s work harvest is good Corn Harvester Small Corn Harvester Harvester Harvesting Way 1. Cut and place the corn in the sun machine. After a few days of Sun drying, the moisture content of the KERNELS is reduced to 20 % ~ 22% , with mechanical or manual picking, peeling, and then t...
发表评论
阅读全文